Monday, 23 May 2016

Why Silence Is So Good For Your Brain



In a loud and distracting world, finding pockets of stillness can benefit your brain and body. Here are four science-backed reasons why.

We live in a loud and distracting world, where silence is increasingly difficult to come by -- and that may be negatively affecting our health.
In fact, a 2011 World Health Organization report called noise pollution a "modern plague," concluding that "there is overwhelming evidence that exposure to environmental noise has adverse effects on the health of the population."
We're constantly filling our ears with music, TV and radio news, podcasts and, of course, the multitude of sounds that we create nonstop in our own heads. Think about it: How many moments each day do you spend in total silence? The answer is probably very few.
As our internal and external environments become louder and louder, more people are beginning to seek out silence, whether through a practice of sitting quietly for 10 minutes every morning or heading off to a 10-day silent retreat.
Inspired to go find some peace and quiet? Here are four science-backed ways that silence is good for your brain -- and how making time for it can make you feel less stressed, more focused and more creative. 
1. Silence relieves stress and tension. 
Florence Nightingale, the 19th century British nurse and social activist, once wrote that “Unnecessary noise is the most cruel absence of care that can be inflicted on sick or well.” Nightgale argued that needless sounds could cause distress, sleep loss and alarm for recovering patients.
It turns out that noise pollution has been found to lead to high blood pressure and heart attacks, as well as impairing hearing and overall health. Loud noises raise stress levels by activating the brain's amygdala and causing the release of the stress hormone cortisol, according to research.
An unpublished 2004 paper by environmental psychologist Dr. Craig Zimring suggests that higher noise levels in neonatal intensive care units led to elevated blood pressure, increased heart rates and disrupted patient sleep patterns. 
Just as too much noise can cause stress and tension, research has found that silence has the opposite effect, releasing tension in the brain and body.
A 2006 study published in the journal Heart found two minutes of silence to be more relaxing than listening to "relaxing" music, based on changes in blood pressure and blood circulation in the brain.
2. Silence replenishes our mental resources.
In our everyday lives, sensory input is being thrown at us from every angle. When we can finally get away from these sonic disruptions, our brains' attention centers have the opportunity to restore themselves.
The ceaseless attentional demands of modern life put a significant burden on the prefrontal cortex of the brain, which is involved in high-order thinking, decision-making and problem-solving.
As a result, our attentional resources become drained. When those attention resources are depleted, we become distracted and mentally fatigued, and may struggle to focus, solve problems and come up with new ideas.
But according to attention restoration theory, the brain can restore its finite cognitive resources when we're in environments with lower levels of sensory input than usual. In silence -- for instance, the quiet stillness you find when walking alone in nature -- the brain can let down its sensory guard, so to speak.
3. In silence, we can tap into the brain's default mode network. 
The default mode network of the brain is activated when we engage in what scientists refer to as "self-generated cognition," such as daydreaming, meditating, fantasizing about the future or just letting our minds wander.
When the brain is idle and disengaged from external stimuli, we can finally tap into our inner stream of thoughts, emotions, memories and ideas. Engaging this network helps us to make meaning out of our experiences, empathize with others, be more creative and reflect on our own mental and emotional states.
In order to do this, it's necessary to break away from the distractions that keep us lingering on the shallow surfaces of the mind. Silence is one way of getting there.
Default mode activity helps us think deeply and creatively. As Herman Melville once wrote, "All profound things and emotions of things are preceded and attended by silence."
4. Getting quiet can regenerate brain cells.
Silence can quite literally grow the brain.
A 2013 study on mice, published in the journal Brain, Structure, and Function, involved comparing the effects of ambient noise, white noise, pup calls and silence on the rodents' brains. Although the researchers intended to use silence as a control in the study, they found that two hours of silence daily led to the development of new cells in the hippocampus, a key brain region associated with learning, memory and emotion. 
While preliminary, the findings suggested that silence could be therapeutic for conditions like depression and Alzheimer's, which are associated with decreased rates of neuron regeneration in the hippocampus.

Originally Posted by Carolyn Gregoire Senior Writer, The Huffington Post.
Re-posted by Apocalypse Acoustics Inc. May 2016.

For any concerns regarding speech privacy, noise isolation, vibration control call us at +919395333255 or mail us at apocalypse@mail.org
 

Monday, 4 January 2016

What is Reverberation by Apocalypse Acoustics Part Two.

What is Reverberation?
 
Technically it is the time taken for noise to stop after the noise source has ceased, measured in milliseconds

With a relatively dead room (a room with a short reverberation time) the noise (words) created by the spoken sentence become inaudible relatively quickly, allowing the response to be heard and a further question asked, with relatively ease. 

However in a live room (a room with a higher reverberation time) this becomes a much more difficult task to carry out. The sound of the previous word over laps the sound of the next word and the sound of the first sentence over laps the sounds within the second sentence and so on and so forth. This means the examples from above would sound more like. (Where capital words express more clearly heard word)

  • WHAT on earth is REVERBERATION TIME? 
  • How do I TREAT it? 
  • The time for NOISE to Stop…… 
  • Do you get the idea. 
It is like having a conversation in a round, like when you sang nursery songs as a child.

However high reverberation time isn’t always a bad thing, if you are Gregorian monk or in a vocal group, a longer reverberation time is desired as it produces a more appealing and warm sound. 

This provides a much desired atmosphere to listen or to record in. 
Producing music in a dead room for this type of activity would really take away from the atmosphere and kill the mood and ambiance trying to be achieved, as the notes world die very quickly and make the sound appear very flat.

These were only some of the Points we pondered and gave a brief summary of making something plain or intelligible about reverberation.

Reverberation is a elaborated, detailed subject which needs much lucidity and clearness.
For technicalities please do contact us at apocalypse@mail.org or call us at +919395333255.
Visit us at www.apocalypseindia.com

What is Reverberation by Apocalypse Acoustics Part One



What is Reverberation???

Reverberation is another name for what most people know and understand as echo. 

The following analogy explains what reverberation is quite concisely without getting overly technical.

If you press the accelerator pedal of a car, the car accelerates to a certain speed. If the road is smooth and level the speed will remain constant. With a constant force on the accelerator, the engine produces enough horse power to overcome frictional and aerodynamic losses and maintain a steady and even speed, or steady state condition. If you take your foot of the off the accelerator, the car will gradually slow, and come to a stop.

Sound within a room acts similarly to this. When a loudspeaker is turned, it emits noise into the room that quickly grows to a certain level. This level is the steady state or equilibrium point at which the sound energy radiated from the loudspeaker is enough to over come loses in the air and at the room boundaries. A greater sound energy radiated from the loudspeaker will result in a higher equilibrium level, whereas less energy to the loudspeaker will result in a lower equilibrium level. If you push your foot flat to the floor in the car the equilibrium or speed will be much faster, than those Sunday drivers who only slightly depress the accelerator pedal.
When the loudspeaker is turned off, it takes a finite length of time for the sound level in the room to decay to inaudibility. This means there is an exact amount of time from when the loudspeaker is turned off until the sound from the speaker cannot be heard.

For most environments such as conference rooms, classrooms, sports halls, offices and the typical working environment or public space, the longer the time between the noise source stopping and the noise becoming inaudible, the worse the acoustic environment is perceived. This is because a lot of words and noises overlap one an another.

You can say, 
” What on earth is reverberation time? 
How do I treat it.?
” In a room with high absorption or with few reflections the sound dies immediately or very quickly allowing Us to reply with the right answers.
Please Refer Part Two of this Resource, What is Reverberation?
For Any Clarifications call us at +919395333255 or Email us at apocalypse@mail.org
Visit us at www.apocalypseindia.com


Monday, 11 May 2015

Soundproofing by Apocalypse Acoustics



SOUNDPROOFING By Apocalypse Acoustic Sciences Corp

Soundproofing is any means of reducing the sound pressure with respect to a specified sound source and receptor. 
There are several basic approaches to reducing sound: increasing the distance between source and receiver, using noise barriers to reflect or absorb the energy of the sound waves, using damping structures such as sound baffles, or using active anti noise sound generators.

TWO PROBLEMS To Be Addressed:


  • Two distinct soundproofing problems may need to be considered when designing acoustic treatments - to improve the sound within a room (See anechoic chamber), and reduce sound leakage to/from adjacent rooms or outdoors. 
  • Acoustic quieting, noise mitigation, and noise control can be used to limit unwanted noise. 
  • Soundproofing can suppress unwanted indirect sound waves such as reflection that cause echoes and resonances and that cause reverberation
  • Soundproofing can reduce the transmission of unwanted direct sound waves from the source to an involuntary listener through the use of distance and intervening objects in the sound path.


For More Information, Solutions and Techniques in Soundproofing, please do visit us at www.apocalypseindia.com or Call +919395333255

Apocalypse Acoustic Sciences Corp provides complete acoustic design, noise & vibration control for facilities of all types whether it is to support unaided speech or live music or to effectively optimize the acoustical design for speech intelligibility & Musical Acoustics.

Thursday, 16 April 2015

NOISE CONTROL By ACOUSTICS ASIA

INTRODUCTION TO NOISE CONTROL By ACOUSTICS ASIA
Definitions and Background 
What is Noise? 

  • Noise is disagreeable or unwanted sound.  In many instances, noise is a relative definition of a sound since one person’s music may be another person’s noise.  It is difficult to give a very clear definition of an irritating noise.  Generally, noise is an unwanted sound, regardless of its intensity or duration. 
     
  • Noise Pollution has been recognized as a major threat to human well being.  Much discussion and legislation has evolved in an attempt to recognize and combat the problem of noise pollution.  It has been recognized that noise, of sufficient intensity, can damage hearing and be classified as a hazard.  
  • In combating the problem of noise pollution it is necessary to use a means of measuring noise levels and a system of classification.  The decibel is a number which relates sound intensity or sound pressure.  When most people use the term decibel or discuss noise levels in decibels they are referring to decibels as related to the “A-weighted” scale or, dBA. 
  • The A-weighted scale parallels the sensitivity of the human ear and uses the lowest audible sound that the human ear can detect as the reference point for determining the decibel level of a noise.   
    The reference intensities used above represent the threshold of audibility where sound is just loud enough to be heard.  At 140 decibels or more acute pain is experienced.  Some common noise values are as follows:  
  • Ordinary conversation – 60 dBA.
  • Heavy traffic – 80 dBA.
  • Cocktail Party – 90 dBA.
  • Moving subway train – 100 dBA.
  • Riveting gun – 130 dBA.
  • Hard rock band – 100 to 138 dBA.
  • Jet plane heard at close range – 150 dBA 
  • Any noise rating above 80 dBA produces physiological effects and any long term exposures at much or above 90 or 100 decibels will cause permanent damage to a person’s hearing.  An increase of 10 dBA is a doubling of loudness with respect to the human ear. 
  • Noise generally consists of many tones with varying rates of vibration or frequency.  The frequency expressed in cycles per sound or hertz (HZ) usually is in the range of 20 to 20,000 cycles per second. 
  •  
  • The ear is not very responsive to very low or very high tones as it is to the tones of medium frequency. 
  •  
  • The dBA scale matches the response of the ear, and is therefore well suited for evaluating noise as it relates to human beings. 

For Noise Control Solutions & Perfections:
Apocalypse Acoustics Sciences Corp
#605, 6th Floor, Vani Nilayam, Sebastian Road, Secunderabad-3. Telangana. India.
Ph: +91-40-64561266. Fax: +91-40-27531331. www.apocalypseglobal.org

Tuesday, 17 March 2015

Reverberation Time@acousticsasia



REVERBERATION TIME
Reverberation is linked to the speed at which sound energy disappears in a room. 
An unfurnished room or space with hard surfaces, such as a church or House of Worship, is perceived as being more reverberant than a well-furnished living room. 



  • The reverberation time is usually defined as the time it takes for sound to decrease by 60 dB. 
  • To determine the length of this time, different parts of the reverberation curve are used. 
  • When measuring Early Decay Time (EDT), an interval of 10 dB is used. 
  • At T20, an interval of 20 dB is used. When determining T20, the evaluation does not start until after the sound level has already fallen by 5 dB. 
  • At T30, an interval of 30 dB is used and here, too, the evaluation starts after the sound level has fallen by 5 dB. If the reverberation curve is straight, the EDT, T20 , T30, will all produce the same value. 


  • In practice, the reverberation curve is not straight (dashed line), which means that the descriptors will differ. The descriptors T20 and T30 are usually called “late reverberation times” as they measure at the later part of the curve.

EDT is called “early reverberation” and is considered to better reflect how we perceive the reverberance in the room.

For more technicalities and answers please mail us at apocalypse@mail.org or call us at +919395333255. Noel Flemming. Copyright 2015. Apocalypse Acoustics.